Holding force up to 80 N (at the end position, energized state)
Stroke up to 30 mm (model-dependent); CHEO1-48/75
Voltage: 6V / 9V / 12V / 24V DC (multiple voltage options available depending on resistance)
Resistance: 2.1 Ω to 329 Ω
Various mechanical options available
Pull-type, Push-type, and Push-Pull types
About CHE tubular solenoid
The CHE tubular solenoid features a compact and robust design, engineered specifically for linear motion applications. It is an ideal choice for locking mechanisms and automation systems, delivering powerful force within a durable and space-saving cylindrical package.
CHE Tubular solenoids are typically classified into three types based on plunger configuration and motion
The plunger extends outward when energized, providing a pushing motion. It returns via spring or gravity when de-energized.
The plunger retracts inward when energized, delivering a pulling action. It also relies on a spring for reset.
A combination design that often features a through-hole or extended plunger, allowing both push and pull capabilities with higher force output, commonly used in applications requiring bidirectional actuation.
Technical Advantages
Our CHE Series tubular solenoids are meticulously engineered to deliver exceptional linear motion control, boasting an exceptionally high “force-to-volume ratio.” Unlike standard solenoid, our design focuses on maximizing magnetic efficiency within a compact tubular structure, ensuring consistent actuation performance even in demanding operating environments.
Whether you require a robust push-pull mechanism for industrial automation or a precision locking system for medical equipment, our CHE Series provides the reliability and adaptability your project demands.
Custom & Prototype Services for CHE Tubular Solenoids
At CHE, we specialize in providing tailored solutions—from initial prototyping to full-scale mass production. We offer rapid sample turnaround times with absolutely no Minimum Order Quantity (MOQ). Whether you need to fine-tune an existing design or require a completely custom-engineered tubular solenoid, we work closely with your team to deliver a solution that precisely meets your exact specifications.We can customize voltage (ranging from 3 V to 190 V), resistance , and duty cycles (ranging from 10% intermittent operation to 100% continuous operation).Force and stroke: We custom-tailor the force-stroke curve to match your specific load characteristics, with stroke lengths ranging from 8 mm to over 30 mm.
This section documents our experiences helping clients successfully select products, customize samples, and includes articles about clients we encounter in our work, as well as interesting stories from our company.
Supports viewing tubular solenoid power-on test videos, factory videos, etc.
Our Advantages
By choosing to partner with us, you gain direct access to the source of production. As a manufacturer dedicated to exquisite craftsmanship, we implement rigorous controls at every stage of the production process—from the meticulous selection of raw materials to the final quality inspection of the finished product. This vertically integrated production model ensures that every CHE tubular solenoid meets the exacting standards we have established for durability and safety.
Expert Engineers — Possessing profound professional expertise in the design and manufacturing of solenoid valves.
Efficient Sales Team — Upholding a “Customer First” philosophy to provide prompt and clear communication services.
Rapid Response — Delivering price quotes within 24 hours and providing samples within 7 to 15 days.
This is the largest tubular solenoid, the tubular body has a diameter of 48 mm and a length of 75 mm.
When the duty cycle is 10%, the holding force is approximately 80N; at 100%, it is approximately 55N.;
Max Stroke: 30 mm.
This is the second largest tubular solenoid, the tubular body has a diameter of 38 mm and a length of 64 mm.
When the duty cycle is 10%, the holding force is approximately 70N; at 100%, it is approximately 45N.;
Max Stroke: 25 mm.
This is the third largest tubular solenoid, the tubular body has a diameter of 30 mm and a length of 57mm.
When the duty cycle is 10%, the holding force is approximately 58N; at 100%, it is approximately 40N.;
Max Stroke: 16 mm.
This is the smallest tubular solenoid , the tubular body has a diameter of 13 mm and a length of 30mm.
When the duty cycle is 10%, the holding force is approximately 6N; at 100%, it is approximately 2.5N.;
Max Stroke: 8mm.
This is the second smallest tubular solenoid , the tubular body has a diameter of 19 mm and a length of 40mm.
When the duty cycle is 10%, the holding force is approximately 18N; at 100%, it is approximately 8N.;
Max Stroke: 10 mm.
This is the third smallest tubular solenoid , the tubular body has a diameter of 25 mm and a length of 30mm.
When the duty cycle is 10%, the holding force is approximately 32N; at 100%, it is approximately 14N.;
Max Stroke: 10 mm.
- Q:Do you offer custom tubular solenoids?
A:Yes, we can customize tubular solenoids. - Q:What key parameters should I specify when ordering CHE tubular solenoid?
A:To ensure accurate selection, please provide: operating voltage, stroke length, required force at stroke, duty cycle (e.g., 10%, 50%, continuous), mounting type, and any environmental requirements (temperature, humidity, dust/water protection). - Q:What is your typical lead time for tubular solenoid samples and mass production?
A:Standard samples: 5–10 working days. Custom samples: 10–15 working days. Mass production lead time: 20–30 days, depending on order quantity and customization level. - Q:How are tubular solenoids packaged for shipment?
A:Each solenoid is individually packed in anti-static bags with protective caps on plungers and threads. For bulk orders, we use reinforced cartons with foam inserts to prevent damage during transit.
5.Q: What shipping methods do you support?
A:We support express delivery (DHL, FedEx, UPS), air freight, and sea freight. The most cost-effective method depends on order size and urgency. We can quote on FOB, CIF, or EXW terms.
- Q:Do you keep standard tubular solenoids in stock?
A:Typically, the resistance and voltage must be selected before customization takes place; therefore, we generally do not keep these items in stock. - Q:Can I get a datasheet and drawing before orderingtubular solenoid?
A: We provide detailed datasheets including force-stroke curves, dimensions, electrical specifications, to help you evaluate integration and performance.
8:Q：Can I get free samples of tubular solenoid?
A：Certainly. We can provide free samples, but the cost of the samples will be deducted from your next bulk order.
TCT590
CHEO1-1264B
CHEO1-1039B
Tubular solenoid main parameters
Voltage
6V, 12V, 24V DC; custom voltages from 3V to 220V DC available.
Current
Steady-state current at rated voltage; depends on coil resistance and duty cycle.
Duty Cycle
Percentage of “on” time in a full cycle; typical ratings: 10%, 25%, 50%, or continuous (100%).
Stroke
Linear travel distance of the plunger; standard ranges: 8mm to 30 mm, customizable.
Force
7N-90N
Plunger Type
L-type (push), T-type (pull), TH-type (push-pull with extended shaft).
Mounting Style
Threaded body, threaded front/rear, bracket mount, or with mounting nuts.
Coil Resistance
Directly affects current draw and response time.
Return Mechanism
Internal spring return (standard) or ext
Contact Us For Any Questions!
Phone: +86 13506671800
Whatsapp: +8613506671800
Email: jocelyn@chen-solenoid.com
Address: 18 Liujiang Road, Liushi Town, Yueqing City, Zhejiang Province, China 325604
